Accessing the Linksys smart WiFi login (web-based setup) page allow users to configure all the basic + advanced settings of the Linksys device.
If you experience problems in accessing the web-based setup page, then this can only happen due to the following reasons:
- Error with the internet connectivity of Linksys Device.
- Wireless connectivity issues with the range extenders.
Before you begin, ensure that you have tried accessing the web-based setup page of your Linksys WiFi range extender once using extender.linksys.com or default IP address of your device. For more troubleshooting tips and guidance, dial a toll-free number 1-844-726-2255 and ask our technicians support for extender.linksys.com.
Given below are the helpful tips for troubleshooting setup issues of your Linksys wireless exetnder:
Check whether your desktop or a laptop is connected to the Linksys extender’s WiFi network or not
Ensure that the Linksys range extender is properly connected to the right wireless network.
Check the connection status under the “‘Wireless Utility” of your computer or laptop.
In case you can’t connect to Linksys extender via WiFi or your smart WiFi setup not working then you are supposed to select the SSID (network name) from the list of available and active networks – enter the security key (password) and tap on the Join or Connect option.
Thereafter, you can easily access the web-based setup page of your Linksys device. For more instructions, interact with our technical department immediately.
Check the LED lights on your Linksys device
The power LED lights on your range extender will help you in detecting the status of your device (extender) for the Linksys WiFi range extender setup process.
Power Cycle the Linksys WiFi Range Extender
Disconnect all the devices from your range extender. After that, unplug your range extender from the power outlet. Unplug it back after a few minutes. Wait for the LED lights on your device to become solid green.
Check your computer’s/ laptop’s connectivity to the Linksys device
As a matter of fact, a simple ping test can easily trace the communication between your Linksys range extender and the computer/ laptop.
You will need the IP address of your Linksys device. The manufacturers assigned the different IP addresses to the extenders. To know more about the ping test, contact our technical department as soon as possible.
Reset your Linksys Device
Carefully press the reset hole on your range extender through a paper clip or pin. Hold it for a few seconds and after that, release it.
Resetting your Linksys device will restore all its factory default values. Thereafter, you will have to manually configure Linksys range extender again.
In case you’re still unable to access the Linksys extender web-based setup page after the reset process, then make sure that you have asked us for extender.linksys.com support